☰
Close Icon

Main Menu

Electric Motor Grease

  • Base Oil Technology: Mineral
  • NLGI: #2
  • Base Oil Viscosity: 106
  • Thickener: Polyurea
Contact amsoil

AMSOIL Industrial Electric Motor Grease features an advanced polyurea thickener designed to provide superior bearing protection at elevated operational temperatures. It is formulated with rust and oxidation inhibitors to provide excellent corrosion protection for electric motors operating in severe-service conditions.

  • Maintains consistency throughout grease service life.
  • Protects against corrosion.
  • Extremely resistant to oxidation.
  • Exhibits superior mechanical stability.

 

PROTECTION IN EXTREME ENVIRONMENTS

  • Provides excellent thermal stability for motors operating in severe-service conditions.
  • Excellent low-temperature pumpability while also withstanding extreme heat.

 

SUPERIOR MOTOR PROTECTION AND FRICTION REDUCTION

  • Resists oil separation to avoid bleeding into the motor’s windings and provides long oil life without changing oil consistency.
  • Reduces friction to increase the efficiency of electric motors, helping bearings operate cooler and last longer.

 

See how AMSOIL Industrial Electric Motor Grease compares against the rest of our grease family.

 

Non-rotating Bearings and Sliding Applications

General Purpose/Rotating Bearings

Specialty/Food-Grade

Lithium

 

Calcium Sulfonate

Other

 

 

 

Technical Overview

TYPICAL TECHNICAL PROPERTIES*

AMSOIL Industrial Electric Motor Grease

Stock Code   GREM
Thickener Type   polyurea
NLGI Consistency Grade   2
Base Oil Viscosity @ 40°C, cSt ASTM D445 106
Penetration, worked 60 strokes ASTM D217 290
High Temperature Life, hrs. ASTM D336 1238
Low Temperature Torque (starting) ASTM D1478 5930
Low Temperature Torque (running) (-30C) g-cm ASTM D1478 472
Dropping Point, ºC (ºF) ASTM D2265 304 (580)
Oxidation Stability @ 1000 hrs, psi ASTM D942 <5
Water Washout, % ASTM D1264 <5
Rust and Corrosion ASTM D1743 Pass
Oil Separation 24 hrs, % weight loss ASTM D1742 0.81
Four-Ball Wear Test, scar, mm ASTM D2266 0.5
Four-Ball EP, kgf ASTM D2596  
Weld Point   315
Load Wear Index   50
Copper Corrosion ASTM D4048 1b
Color   Blue

*Technical properties are general characteristics of the product and not manufacturing specifications. Variations that do not affect product performance should be expected. Product formulations are subject to change without notice. Customers are responsible for determining product suitability for use with their equipment.



Contact amsoil