Skip to Main Content
Close Icon

Main Menu

Begin typing to search, use arrow keys to navigate, Enter to select.

Synthetic Multi-Purpose Grease

Product code : (GLC)

  • Premium formulation delivers excellent film strength and shear resistance for outstanding wear protection under heavy loads
  • Resists oxidation in the presence of increased heat for long service life
  • Adheres to metal to prevent squeeze-out and remain in place
  • Resists water-washout to continue protecting in adverse conditions
  • Provides excellent cold-weather pumpability, increasing low-temperature protection and operability

Synthetic Multi-Purpose Grease



Excellent all-around synthetic grease designed for a variety of industrial applications. Meets the highest grease standards and provides outstanding protection against wear and corrosion for long component life, even in severe-service conditions.

FIGHTS WEAR

  • Premium synthetic base oils and high-quality calcium-sulfonate-complex thickeners protect bearings, bushings and other components from metal-to-metal contact and wear.
  • Formulated with extreme-pressure (EP) additives to provide an extra measure of protection during severe service.
  • Resists thermal breakdown and oxidation to provide excellent protection and component cleanliness throughout a long service life.

WIDE TEMPERATURE RANGE

  • Withstands the effects of increased heat.
  • Delivers excellent low-temperature pumpability to maximize energy efficiency in cold weather.
  • Provides outstanding protection and performance throughout a wide temperature range, helping boost efficiency and reduce maintenance.

Synthetic Multi-Purpose Grease

Typical Technical Properties**

Property Value
Thickener Type Calcium sulfonate complex
NLGI Consistency Grade #2
NLGI Performance Grade GC-LB
Penetration (ASTM D217), worked 60 strokes 282
Dropping Point, ºF (ASTM D2265) >540
Water Washout, % (ASTM D1264) 1.70
Rust and Corrosion (ASTM D1743) Pass
Oil Separation, % loss (ASTM D1742) 0
Four-Ball Wear Test, Scar, mm (ASTM D2266) 0.40
Fretting Wear, mg (ASTM D4170) 2.3
Four-Ball EP, kgf (ASTM D2596) Weld Point 620
Load Wear Index 74
Timken OK Load Test, lbs (ASTM D2509) 70
Low-Temperature Torque, N•m (ASTM D4693) (-40°C [-40°F]) 6.4
Color Red