Back
Distributors
☰
Main Menu
AMSAIR-PG
- Base Oil Technology: Synthetic Polyglycol
- Viscosity Range: ISO 46
- Viscosity Index: 164
AMSOIL Industrial AMSAIR-PG Synthetic PAG Compressor Oil is engineered to prevent varnish and problems associated with water buildup in rotary-screw compressors. It provides protection equivalent or superior to original equipment manufacturer (OEM) polyalkylene glycol fluids at a lower price.
- Up to 10,000 hours service life for reduced maintenance.
- Superior resistance to sludge, carbon and varnish deposits for maximum compressor efficiency.
- Excellent anti-wear protection helps extend equipment life.
- Outstanding protection against rust and corrosion.
- Excellent foam-resistance helps dissipate heat.
- Less expensive than OEM PAG coolants.
See how AMSOIL Industrial AMSAIR-PG compares against the rest of our compressor oil family.
See how AMSOIL Industrial AMSAIR-PG compares against the rest of our compressor oil family.
|
|
ISO 32 |
ISO 46 |
ISO 68 |
ISO 100 |
ISO 150 |
ISO 220 |
|---|---|---|---|---|---|---|
|
ROTARY |
|
|
|
No Product |
No Product |
|
|
RECIPRICATING |
No Product |
No Product |
No Product |
|
|
No Product |
|
BLOWERS |
No Product |
No Product |
No Product |
No Product |
Synthetic Blower Oil |
Synthetic Blower Oil |
Typical Technical Properties*
AMSOIL Industrial AMSAIR-PG Synthetic PAG Compressor Oil
|
Test |
Method |
ISO 46 |
|---|---|---|
|
Stock Code |
– |
CPG46AA |
| ISO Viscosity Grade |
ASTM D2422 |
46 |
| Kinematic Viscosity @ 100ºC, cSt |
ASTM D445 |
8.5 |
| Kinematic Viscosity @ 40ºC, cSt |
ASTM D445 |
46.2 |
| Viscosity Index |
ASTM D2270 |
164 |
| Color |
ASTM D1500 |
L0.5 |
| Flash Point ºC (ºF) (COC) |
ASTM D92 |
276 (529) |
| Fire Point ºC (ºF) (COC) |
ASTM D92 |
290 (554) |
| Pour Point ºC (ºF) |
ASTM D97 |
-53 (-63) |
| Rust Procedure A |
ASTM D665 |
Pass |
| Foam Characteristics, ml, seq. I, II, III |
ASTM D892 |
0/0, 0/0, 0/0 |
| Copper Corrosion, 100ºC, 3 hr |
ASTM D130 |
1A |
| Air Release, 50°C, min |
ASTM D3427 |
1.7 |
*Technical properties are general characteristics of the product and not manufacturing specifications. Variations that do not affect product performance should be expected. Product formulations are subject to change without notice. Customers are responsible for determining product suitability for use with their equipment.
AMSAIR-PG