Back
AMSOIL Industrial Synthetic Power Transmission EP Gear Oil GEN2 is engineered to provide maximum protection against scuffing wear and micropitting fatigue and superior cold-weather performance in wind turbine and other industrial gearboxes operating under severe conditions, extreme pressures and shock loads. Its next-generation synthetic polyalphaolefin (PAO) base oils and additive technology resists shearing under extreme stress to maintain viscosity and meet the long-oil-life requirements of industrial gearbox manufacturers.
See how AMSOIL Industrial Synthetic Power Transmission EP Gear Oil GEN2 compares against the rest of our wind gear oil family.
Wind Gear Oil
The price/performance chart compares the price and performance of AMSOIL Industrial, synthetic wind gear oils, with performance measured on the X axis and price on the Y axis. Products are listed in ascending order of both performance and price, forming a diagonal line at a 45-degree angle from bottom-left to top-right. The listed products, from left to right, are EP Series-S, Synthetic Power Transmission EP Gear Oil and Synthetic Power Transmission EP Gear Oil GEN2.
Please select the Favorites list
Code | Package Size | Unit Of Measure | Product |
---|
Typical Technical Properties*
AMSOIL Industrial Synthetic Power Transmission EP Gear Oil GEN2
Test |
|
|
---|---|---|
ISO Viscosity Grade |
ASTM D2422 |
320 |
Kinematic Viscosity @ 100ºC, cSt |
ASTM D445 |
39.4 |
Kinematic Viscosity @ 40ºC, cSt |
ASTM D445 |
316.5 |
Viscosity Index |
ASTM D2270 |
177 |
Specific Gravity |
ASTM D1298 |
0.8612 |
API Gravity |
ASTM D1298 |
32.8 |
Density, lb/gal |
ASTM D1298 |
8.607 |
Clarity |
|
Clear |
Four-Ball Wear Test | ASTM D4172 | |
75ºC, 1200 rpm, 40 kg, 1hr | 0.371 | |
150ºC, 1800 rpm, 40 kg, 1hr | 0.399 | |
54ºC, 1800 rpm, 20 kg, 1hr | 0.316 | |
Moisture, ppm |
ASTM D6304C |
<100 |
Falex B (Failure), LbF |
ASTM D3233 |
4250 |
TAN |
ASTM D664 |
0.8 |
Foam Tendency, ml | ASTM D892 | |
Seq. I | 0/0 | |
Seq. II | 0/0 | |
Seq. III | 0/0 | |
Copper Corrosion 100ºC, 3 hr |
ASTM D130 |
1A |
Micropitting |
FVA 54 |
>10 |
GFT Class |
FVA 54 |
High |
FZG Scuffing Load Test [A/8, 3/90] (Pass) |
DIN 51354 |
>14 |
FAG FE-8 High Load Bearing Wear Test | DIN 51819-3 | |
7.5 speed, 100kN load, 80 hr Roller Wear (Mw50), mg | 2.3 | |
Flash Point ºC (ºF) (COC) |
ASTM D92 |
249 (480) |
Fire Point ºC (ºF) (COC) |
ASTM D92 |
314 (597) |
Pour Point ºC (ºF) |
ASTM D97 |
-48 (-54) |
*Technical properties are general characteristics of the product and not manufacturing specifications. Variations that do not affect product performance should be expected. Product formulations are subject to change without notice. Customers are responsible for determining product suitability for use with their equipment.