TRIBOLITH HT P460-1.5 Red

Product Code: (PCTLHTP46015R)

Base Oil Technology: Synthetic
NLGI: #1.5
Base Oil Viscosity: 460
Thickener: Lithium Complex

Contact amsoil

AMSOIL Industrial TRIBOLITH HT P460-1.5 Red is a high-performance synthetic lithium complex grease engineered to extend bearing life under heavy loads and slow-to-moderate speeds in wet and high-temperature industrial and marine applications.

Maintains mechanical stability in the presence of water.
Wide operating temperature range.
Resists heat and oxidation.
Inhibits wear and corrosion.
Helps extend bearing life.

See how AMSOIL Industrial TRIBOLITH HT P460-1.5 Red Grease compares against the rest of our grease family.

	Non-rotating Bearings and Sliding Applications	General Purpose/Rotating Bearings	Specialty/Food-Grade
Lithium	TRIBOLITH HT 460-2 M3	TRIBOLITH HT 220-2 TRIBOLITH 220 EP TRIBOLITH HT P460-00 EP Red TRIBOLITH HT P460-1.5 Red TRIBOLITH HT P220-2 Red	TRIBOLUBE VG-0 TRIBOLUBE MWG-00 TRIBOLITH HT P1000-2 MG12
Calcium Sulfonate	TRIBOCAL XT 150-2 M5 TRIBOCAL XT 460-2 M5 Open Gear Grease	TRIBOCAL XT P170-0 TRIBOCAL XT P170-1 TRIBOCAL XT P170-2 TRIBOCAL XT 220-2	Synthetic XDP Grease Synthetic High-Speed Bearing Grease TRIBOCAL XT P220-2 FG
Other		TRIBOPLEX 220-2 Red TRIBOPOLY 150-0 EP Green TRIBOPOLY 150-2 EP Green TRIBOPOLY 100-2 EM Blue TRIBOPOLY P150-0 EP Gold TRIBOPOLY 100-00 EP Green	TRIBOPLEX 220-2 FG TRIBOLUBE TMGG TRIBOPLEX P100-2FG TRIBOCAL XT P220-2 FG

Technical Overview

Typical Technical Properties*

AMSOIL Industrial TRIBOLITH HT P460-1.5 Red Synthetic Extreme-Pressure Grease

Test	Method	Result
Stock Code		PCTLHTP46015R
NLGI Consistency Grade		1.5
Operating Temperature Range °C (°F)		-40 to 149 (-40 to 300)
Appearance/Color		Smooth/Red
Thickener		Lithium Complex
Base Oil		Synthetic
Base Oil Viscosity, 40°C, cSt	ASTM D445	460
Base Oil Viscosity Index	ASTM D2270	173
Oxidation Stability, 99°C, 100 hr, kPa	ASTM D942	9
Worked Penetration, 25°C, 60 strokes	ASTM D217	290-320
Dropping Point, °C, (°F)	ASTM D2265	260 (500)
Four-Ball EP Weld Point, kgf	ASTM D2596	500
Four-Ball Wear Scar, 75°C 1,200 rpm, 40 kg, 1 hr, mm	ASTM D2266	0.52
Roll Stability, 25°C, 2 hr, %	ASTM D1831	-2.4
Low-Temperature Torque, starting, -40°C, g·cm	ASTM D1478	2,040
Low-Temperature Torque, running -40°C, g·cm	ASTM D1478	620
Oil Separation During Storage, %	ASTM D1742	0.22
Water Washout, 79°C, %	ASTM D1264	3.5
Rust Prevention, 52°C, 48 hr	ASTM D1743	Pass
Copper Corrosion, 100°C, 24 hr	ASTM D4048	1b

*Technical properties are general characteristics of the product and not manufacturing specifications. Variations that do not affect product performance should be expected. Product formulations are subject to change without notice. Customers are responsible for determining product suitability for use with their equipment.

Safety Data Sheet

TRIBOLITH HT P460-1.5 Red

Product Data Sheet

TRIBOLITH HT P460-1.5 Red

Contact amsoil

Main Menu

TRIBOLITH HT P460-1.5 Red

Your browser is outdated.